I made the length as long as as possible, leaving just enough room for the hinge to clear the top of the opening.Ĭheck out the photo for this step to see what the hinges looks like in the closed and open position. For my dresser, the best frame pivot location was about one inch from the front, ad about 1/3 of the distance from the shelf to to the top of the opening. You can model this with a stiff piece of paper and a thumb tack. I did 3 coats of paint for both the base and drawers plus a few touchups. Start painting The picture below is midway through the painting process. Tape off the edges of the unpainted areas so you don’t get paint all over the inside of the file cabinet. If the drawer face does not drop low enough, it will be hard to insert your electronics, and it may block the signal from your wireless remote.ĭetermine the length and pivot points for the hinges on the dresser frame and the door. Transfer the file cabinet base and drawers to the work surface. The hinge has to support the closed position, and be able to drop the drawer face completely below the shelf. I personally prefer the shelf method, as it is stronger and provides more space.Ģ. You may have to remove the handle first.Ĭonvert the drawer box or add a shelf- you can remove the front from the drawer box and reinforce the bottom to create a slide-out bay, or you can remove the drawer and slides entirely, and insert a shelf that is flush with the bottom of the rail. How to remove the drawer face- Many dressers have drawer faces that can be detached from the drawer box. If you are careful and the dresser design is cooperative it should be possible to design a conversion that will allow you to easily revert back to a drawer in the future.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |